TILE ADHESIVE NDB WB 240
The tile adhesive NDB WB 240 is extremely versatile and may be used for both indoor and outdoor projects, as well as for basements and swimming pools. NDB WB 240 can be used to adhere most types of tiles. According to NDB WB 240, tiles can be utilized in both dry and wet situations. Examples include porcelain, marble, granite, ceramic, glass, and many other types of tiles. Easily be applied using the application spectrum as defined by BS EN 5385-1.
ADVANTAGES
SURFACE PREPARATION
Prior to application, the surface must be cleansed of all loose debris and grease. The surface may be moistened with potable water under hot weather circumstances. It is possible to apply cementitious materials to a variety of surfaces, including block work, concrete, and rough plastered surfaces. Before tiling can be installed, the surface needs to be appropriately aged (at least Seven days for newly erected masonry surfaces and freshly plastered surfaces). Additionally, it is advised against tiling over expansion joints and instead to treat them properly. Prior to applying NDB WB 240, highly absorbent surfaces should be moistened. Before installing the tiles, any damaged or unstable surfaces need to be fixed. Additionally, it's critical to make sure there isn't any dust
PRODUCT PREPARATION
Water must be measured ahead of time according to the amount of the item being used. The mortar powder should be poured on top of the water to avoid the substance from sinking to the bottom of the mixing container. The mixing vessel must be sanitized, non-corrosive, and clean. In order to blend, only use potable water. It is also suggested that the material be mechanically mixed using a mortar and pestle or other mechanical mixing methods in order to create a consistent, lump-free mix.
Formulation by UAE manufactured by Pakistan
Order Now
Korangi Industrial Area 74900 Karachi Pakistan CONTACT : 0314-9689443 CONTACT : 0343-2171472 OFFICE NO : 021-38641106